This report is provided to inform you about the source and quality of your drinking water, and how it compares to national drinking water standards. This report is a snapshot of last year's water quality. Please take a moment to review this important information.
Sherwood Estates water system is supplied by 1 Groundwater well located at the end of Fountain Dale Circle.
Sherwood Estates water source has been determined by the Alaska Department of Environmental Conservation to be Vulnerable Groundwater.
To meet the treatment requirements associated with a vulnerable classification, Sodium Hypochlorite (Chlorine) is added as a disinfectant, and a chlorine disinfectant residual is maintained and monitored on a daily basis.
The well water also contains high levels of Iron and Manganese. A filter system is employed to remove those contaminants.
The Alaska Department of Environmental Conservation has not yet completed a source water assessment for Alpat Water Utility - Sherwood Estates Division. When a source water assessment has been completed, you will be able to request an executive summary of the assessment.
The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.
Contaminants that may be present in source water include:
Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
Inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff, and residential used.
Some people may be more vulnerable to contaminants in drinking water than the general population. The following people may be more at risk from infections due to water impurities:
- Immuno-compromised persons such as
- Persons with cancer undergoing chemotherapy
- Persons who have undergone organ transplants
- People with HIV/AIDS or other immune system disorders
- Elderly Persons
These people should seek advice about drinking water from their healthcare providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline
Impurities in the Water
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some impurities. The presence of impurities does not necessarily indicate that water poses a health risk. More information about impurities and potential health effects can be obtained by calling the EPA’s Safe Drinking Water Hotline (1-800-426-4791).
To eliminate unnecessary testing expense, the system has applied for and received testing waivers for the following:
A waiver for asbestos testing has been granted due to no asbestos piping in the system. This waiver does not require renewal.
Synthetic Organic Chemicals (SOC)
An SOC waiver was granted for the 2017-2019 monitoring period due to no potential sources of SOC contamination being located within the collection area. Renewal of the waiver is required every 3 years and requires an investigation of the collection area to ensure no sources of contamination exist.
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. This utility is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead
Water Quality Testing
Because of the numerous potential sources and varieties of impurities, state and federal law mandates the routine testing for all impurities (over 80) known to pose a risk to public health. Some impurities can affect water sources quickly and others are not expected to vary significantly from year to year. Thus, testing schedules also vary from monthly to once every nine years, depending on risk and the impurity tested. Your water system is routinely monitored for all applicable hazardous impurities. However, of those impurities, only those detected in routine testing are listed in the Detected Impurities table.
|Impurity||Year||Units||MCL||MCLG||Reported Value||Range||Violation||Likely Source|
|Barium||2019||ppb||2000||2000||24||N/A||N||Discharge of drilling wastes; discharge from metal refineries; erosion of natural deposits|
|Chlorine (as Cl₂)||2018||ppm||4||4||2.3||0.3-2.3||N||Water additive used to control microbes|
|Haloacetic acids (HAA5)||2019||ppb||60||N/A||24||N/A||N||Byproduct of drinking water disinfection|
|Radium 226 and Radium 228 (combined)||2016||pCi/L||5||0||0.026||N/A||N||Erosion of natural deposits|
|Total Trihalomethanes (TTHMs)||2019||ppb||80||N/A||24||N/A||N||Byproduct of drinking water disinfection|
|Impurity||Year||Units||MCL||MCLG||Reported Value||Samples > MCL||Violation||Likely Source|
|Lead||2019||ppb||15||0||2.5||0||N||Corrosion of household plumbing systems; erosion of natural deposits|
|Copper||2019||ppb||1300||1300||1075||0||N||Corrosion of household plumbing systems; erosion of natural deposits|
Definitions And Terms
- (Maxiumum Contaminant Level) The highest level of an impurity allowable in drinking water.
- (Maximum Contaminant Level Goal) The amount of an impurity below which there is no known or expected health risk.
- (Maximum Residual Disinfectant Level) The highest level of a disinfectant allowed in drinking water.
- (Maximum Residual Disinfectant Level Goal) The level of a drinking water disinfectant below which there is no known or expected health risk.
- (Action Level) The concentration of an impurity which, when exceeded, triggers treatment or other requirements that a water system must follow.
- (Treatment Technique) A required process intended to reduce the level of an impurity in drinking water.
- (Parts Per Million) This measure corresponds to one penny out of $10,000 or one minute out of about 2 years. 1 ppm is essentially one millionth of the total water volume.
- (Milligrams Per Liter) This is another way of displaying PPM. See PPM for a definition.
- (Parts Per Billion) This measure corresponds to one penny out of $10,000,000 or one minute out of about 2000 years. 1 ppb is essentially one billionth of the total water volume.
- (Micrograms Per Liter) This is another way of displaying PPB. See PPB for a definition.
- (Picocuries Per Liter) This is a unit of radioactivity corresponding to one decay every 27 seconds in a volume of one liter of water, or 0.037 decays per second in every liter of air. For a comparison, an average banana contains about 520 Picocuries of radiation.
- (Millirems Per Year) a Millirem is a measure of the health effect of low levels of ionizing radiation on the human body. For some perspective, eating a banana every day for a year would expose you to about 3.6 mrem/Yr.
- (Nephelometric Turbidity Units) This is a precise measurement of how cloudy the water is. The higher the number, the cloudier the water is.
There were 3 significant deficiencies for the utility relating to the fact that the sanitary survey was completed before the paperwork had been completed to request the final approval to operate the new upgraded water treatment and storage facility.
January 2019 - September 2019
All of the paperwork was completed and submitted and the final approval to operate the upgraded water treatment and storage facility was granted.
Possible Negative Health Effects
There are no negative health effects caused by this violation.
Maintenance & Emergency
Your water system is routinely maintained by Northern Utility Services, certified water system operators. If you have any questions or need to report an emergency, Northern Utility Services staff is pleased to assist you. Office hours are 8:00-5:00 Mon-Fri.
Emergency response is available via answering service 24 hours a day, 7 days a week.
Unified Alaskan Utilities
Public Water System Identification (PWSID)
PO Box 233368
Anchorage, AK 99523